0523-88520868

Xianke Instrument

We insist on innovation and serve the society with excellent products

Xianke Instrument

We insist on innovation and serve the society with excellent products





Your present position:

Homepage

News Center

Product News

Company's new generation of 'program-controlled cutting-one machine' market feedback is quite good!

Categories:Product News
Author:
Origin:
Time of issue:2018-10-29
Views:25

(Summary description)This machine is the latest design and production of cutting, grinding together with the integration of sample-cutting equipment, the machine uses PLC, LCD screen and frequency control, such as control

Company's new generation of 'program-controlled cutting-one machine' market feedback is quite good!

公司新一代‘程控型切磨一体机’市场反馈相当好！





Company's new generation of 'program-controlled cutting-one machine' market feedback is quite good!

Categories:Product News
Author:
Origin:
Time of issue:2018-10-29
Views:25

Information

Product manual:

This machine is the latest design and production of cutting, grinding together with the integration of sample-cutting equipment, the machine uses PLC, LCD screen and frequency control, such as control of the entire operating procedures, compact, pleasing in appearance, operation Simple, greatly improve work efficiency. Applicable to highway, railways, water conservancy, schools, construction projects and other departments to test the laboratory sample preparation. Tap water cooling.

The main technical parameters :

(A), cutting:

(1), the maximum cutting sample height of 170mm, cut the sample spacing factory set to 50,70,100,150 mm adjustable (can be customized according to customer demand); (2), host power 4KW, variable frequency motor power 0.55 KW, cutting line speed 0-50m / min (adjustable); (3), work: PLC digital control;

(B), polished:

(1), grinding power head power: 1.1KW'2 sets of 3000 r / min

(2), table motor power: 0.55KW1500 rev / min

(3), grinding wheel diameter: Æ 200mm

(4), design standard grinding specifications: Cylinder: 50-150

(5), the standard accuracy:

A, flatness: 50 within the tolerance ± 0.05mm

B, finish (according to mechanical roughness standard): Ra3.2

(6), automatic grinding feed: 0.04 ~ 0.12mm adjustable

(C), Dimensions:

Length * width * height 2380 * 900 * 1400mm

Technical advantages:

1, diamond saw blade: saw blade is made of high fierce steel, polished by heat treatment after processing, and no deformation. Diamond blade and the general blade head is not the same, the use of high-quality A-class diamond head, wear-resistant super, for a variety of rocks

2, the host power: 4KW; variable frequency motor power: 0.55KW

3, the cutting spindle diameter: 55mm, enhance the stability of the cutting system to enhance the cutting of the sample parallelism

4, cutting walking form: to change the market similar products in the process of idle running speed of the status quo, the machine uses a new frequency motor control, according to the actual operation of free to set walking speed, reduce idling walking time and improve work efficiency.

This machine features: high efficiency, one can cut at the same time a few polished cylinder, two separate single-use efficiency of 5 times and easy to operate.

Scan the QR code to read on your phone

Previous: None

Next: None

Previous: None

Next: None

Recommended news

Company's new generation of 'program-controlled cutting-one machine' market feedback is quite good! 2018.10.29.

The first geotechnical engineering new technology will be successfully held 2018.10.29.

October18-20,thefirstgeotechnicalengineeringandtechnologypromotionwillbeheldattheZijingangcampus.Themeetingisascienceandproductivityofthecollision,butalsothecountry'sfirstgeologicalengineeringandtechn

The 2nd International Chinese Association of Geotechnical Engineers and the International Conference on Earthquake Engineering w 2018.10.29.

October25to27,thesecondInternationalChineseAssociationofGeotechnicalEngineeringandEarthquakeEngineeringInternationalConferenceheldinChengdu,theconferencetheme"Geotechnicalandseismicengineeringtheoryan

Shaanxi Province Metal Mine Environmental Geotechnical Engineering Symposium was successfully held 2018.10.29.