SCQ-400E pneumatic cutting machine
The SCQ-400E stone cutting machine is one of our series of stone cutting machine products. It uses diamond circular saw blades to cut and sample various non-metallic solids. It is particularly suitable for cutting and sampling various rocks and minerals, building concrete, and refractory bricks. It is essential equipment for sample preparation in petroleum, geological, coal, metallurgical, construction, transportation, and university research departments. Main technical parameters: 1. Diamond saw blade: 1A1RSSØ400×32×1.2 2. Main engine power: Y112M-43KW 3. Cutting raw material height: ￠100mm 4. Fixture: Pneumatic clamping 5. Working method: The blade can automatically rise and fall or manually rise and fall by button. 6. Cooling method: Tap water cooling 7. Cabinet size: Length 680 width 700 height 1200mm 8. Weight: 250KG Usage: 1. Connect to the three-phase power supply of the air switch connector. 2. Press the start button and immediately press the stop button to make the diamond saw blade rotate in the direction indicated by the arrow. 3. Connect the tap water cooling water pipe and ensure sufficient pressure. 4. Place the cylinder in the V-shaped groove on the workbench, open the solenoid valve switch, and tighten the test piece with the pressure bar. 5. Use your foot to step on the foot switch to make the blade rise and cut the test piece. After the sample is cut, the blade can automatically return. Precautions: 1. The saw blade must rotate in the direction indicated by the arrow. 2. There must be cooling water with sufficient pressure. 3. The track must be rinsed with water after each cut.
Keywords:
Detailed description
The SCQ-400E stone cutting machine is one of our factory's series of stone cutting machines, using diamond disc blades to cut and sample various non-metallic solids. It is especially suitable for cutting and sampling various rocks, minerals, building concrete, and refractory bricks, and is essential equipment for sample preparation for petroleum, geology, coal, metallurgy, construction, transportation, and university research departments.
Main technical parameters:
1. Diamond cutter: 1A1RSS Ø400×32×1.2
2. Main motor power: Y112M—4 3KW
3. Cutting blank height: ￠100 mm
4. Fixture: Pneumatic clamping
5. Working mode: The blade can be raised and lowered automatically or manually by button.
6. Cooling method: Tap water cooling
7. Box dimensions: Length 680, Width 700, Height 1200mm
8. Weight: 250KG
Instructions for use:
1. Connect the three-phase power supply to the air switch connector.
2. Press the start button, then immediately press the stop button to make the diamond saw blade rotate in the direction indicated by the arrow.
3. Connect the tap water cooling pipe and ensure sufficient pressure.
4. Place the cylindrical specimen in the V-groove on the workbench, open the solenoid valve switch to allow the pressing bar to clamp the specimen.
5. Briefly press the foot switch with your foot to raise the blade for cutting the specimen. After the sample cutting is complete, the blade can automatically retract.
Precautions:
1. The saw blade must rotate in the direction indicated by the arrow.
2. Sufficient cooling water pressure is required.
3. The track must be rinsed clean with water after each cut.
Related Products
Inquiry Message
We will contact you within one working day. Please pay attention to your email.
Service Hotline
Email:jyxkyq@163.com
Address: Sanlin Industrial Park, Liangxu, Jiangyan District, Taizhou City, Jiangsu Province
Copyright © 2025 Taizhou Xianke Instrument Factory