SCQ-300C cutting machine

The SCQ-300C stone cutting machine is one of our factory's series of stone cutting machine products, which uses diamond disc blades to cut and sample various non-metallic solids. Especially suitable for cutting and sampling various types of rocks, ores, building concrete, and refractory bricks, it is an essential equipment for sample preparation in petroleum, geology, coal, metallurgy, construction, transportation, and scientific research departments of colleges and universities. Main technical parameters: 1. Diamond cutter: 1A1RSS Ø 300 × twenty × one point two 2. Host power: Y112M-4 2.2KW 3. Cutting height of raw material: 100mm 4. Cooling method: tap water cooling 5. Box size: length 680, width 700, height 1200mm 5. Weight: 250KG Usage: 1. Connect the three-phase power supply to the air switch connector. 2. Press the start button and immediately press the stop button to rotate the diamond saw blade in the direction indicated by the arrow. 3. Connect the tap water cooling water pipe and ensure sufficient pressure. 4. Grasp the specimen tightly on the workbench and lay it flat, push the workbench to bring the specimen close to the cutting blade, and then slowly cut into the specimen. The cutting speed is suitable for cutting depths of 40-60 millimeters per minute. When the test block is soft or thin, it can be cut faster, otherwise it is better to cut slowly. Notes: 1. The saw blade must rotate in the direction indicated by the arrow. 2. Sufficient pressure of cooling water is required. 3. The saw blade should slowly approach the test block, otherwise sudden impact too quickly can cause the saw blade to lose teeth or deform. 4. The track must be washed clean with water every time it is cut.

Retail price

0.0

元

Market price

0.0

元

Number of views:

1000

Product serial number

Quantity

Stock:

Category

Back



Equipment Parameter

Product description

Parameters

Main technical parameters:

1. Diamond cutter: 1A1RSS Ø 300 × twenty × one point two

2. Host power: Y112M-4 2.2KW

3. Cutting height of raw material: 100mm

4. Cooling method: tap water cooling

5. Box size: length 680, width 700, height 1200mm

5. Weight: 250KG

Usage:

1. Connect the three-phase power supply to the air switch connector.

2. Press the start button and immediately press the stop button to rotate the diamond saw blade in the direction indicated by the arrow.

3. Connect the tap water cooling water pipe and ensure sufficient pressure.

4. Grasp the specimen tightly on the workbench and lay it flat, push the workbench to bring the specimen close to the cutting blade, and then slowly cut into the specimen. The cutting speed is suitable for cutting depths of 40-60 millimeters per minute. When the test block is soft or thin, it can be cut faster, otherwise it is better to cut slowly.

Notes:

1. The saw blade must rotate in the direction indicated by the arrow.

2. Sufficient pressure of cooling water is required.

3. The saw blade should slowly approach the test block, otherwise sudden impact too quickly can cause the saw blade to lose teeth or deform.

4. The track must be washed clean with water every time it is cut.