Products
Categroies
SC-KY Concrete Pipe Pile Compression Test Device
The concrete pipe pile compression test device is used for the bending performance test of concrete pipe pile, and is made according to the national standard GB13476-2009 prestressed concrete pipe pile and JG/T197-2018 prestressed concrete hollow square brick.
DYJ-1000S fully automatic manhole cover pressure testing machine
DYJ-1000S computerized automatic manhole cover pressure testing machine is a high-precision material testing equipment that adopts hydraulic power source drive, electro-hydraulic servo control technology, computer data acquisition and processing, which can realize closed-loop control and automatic detection, which is composed of four parts: test host, oil source (hydraulic power source), measurement and control system, and test equipment, with a maximum test force of 1000kN and an accuracy level of 1 testing machine.
SCQM-200/300 Programmable Rock Cutting, Grinding and Polishing Integrated Machine
1、 Overview
The SCQM-200/300 programmable rock cutting, grinding, and polishing integrated machine is the latest developed new type of film making equipment in our factory. It adopts programming control and is composed of a base, a rotating workbench, a grinding power head, a variable speed transmission system, a stepper motor, a programmable digital display control screen, PLC, and other series of devices. The whole machine is easy to operate, and all program actions can be operated on the digital control screen, and can also be operated by buttons on the console. The performance is completely stable. Widely used in colleges, water conservancy and hydropower, geology and mineral resources, transportation, construction and other departments. It is the most ideal equipment for making thin films in the laboratory.
2、 Main technical indicators
1. Clamp diameter: Φ 135mm.
2. Clamp speed: speed regulation
3. Diamond grinding wheel diameter: Φ 125/200mm
4. Diamond blade diameter: Φ 200/300mm
5. Total motor power: 1.5KW
6. Maximum grinding sample block: 75 * 25/¥ 100mm
7. Minimum feed rate: 0.01mm
8. Grinding power head power: 1.1KW 3000 rpm
9. Programming controller: PLC and tablet touch screen control, capable of programming 180 program instructions (different working states). Type 200: Grinding a 5mm glass slide to 0.02-0.03mm takes approximately 5 minutes, and multiple slides are ground simultaneously. 300 type: It only takes about minutes to reach the standard
10. Minimum thickness of grindable specimens: 0.02mm
11. Number of grinding discs: 200 type: can hold three discs at a time. 300 type: can load one specimen
12. Data input: Touch tablet.
13. Control mode: automatic or manual.
14. Cooling medium: water cooling.
14. External dimensions: 1170 * 720 * 720mm
15. Weight: 350Kg
SCQM-1A/B type cutting and grinding integrated machine
1、 Function:
The SCQM-1A/B integrated cutting and grinding machine is one of our factory's series of cutting and grinding equipment products. It uses diamond disc blades and grinding wheels to slice and sample various non-metallic solids. It is an essential equipment for sample preparation in petroleum, geology, coal, metallurgy, construction, transportation, and scientific research departments of colleges and universities.
2、 Main specifications:
Core cutting and grinding specifications:
1. SCQM-1A, Ф 9- Ф 25-80mm
2. SCQM-1B, Ф twenty-five × 25-80mm Ф thirty-eight × 25-80mm
Diamond blade specifications:
1. SCQM-1A, Ф one hundred × twenty × 0.8mm
2. SCQM-1B, Ф two hundred × twenty × 1.2mm
Diamond grinding wheel specifications: Ф 200mm
Power: 150W
Blade speed: 2840r/min
Power supply: AC 380V
SCQM-100A Precision Cutting and Grinding Integrated Machine
The SCQM-100A precision cutting mill is one of our factory's series of products, which is a new generation product for processing and preparing crystals, ceramics, glass, metals, rock samples, ore samples, refractory materials, PCB boards, and composite materials.
2、 Main technical parameters:
1. Host power: 380V 1. 1KW
2. Vacuum pump power: 220V 180W
3. Diamond saw blade diameter: Φ 200mm
4. Grinding wheel diameter: 180mm
3. Fixture form: professional clamping of glass slide specifications, vacuum pump adsorption.
7. Minimum thickness of thin slices that can be cut: 0. 5-0. 8mm
9. Can be dry cut or wet cut (dust collector is required for dry cutting).
10. Cooling method: Wet cut tap water cooling.
11. Noise<45dB
12. External dimensions: 650 × five hundred × 650mm
13. Weight: 80Kg
SCQM-100 Precision Cutting and Grinding Integrated Machine
The SCQM-100 precision cutting mill is one of our factory's series of products, which is a new generation product for processing and preparing crystals, ceramics, glass, metals, rock samples, ore samples, refractory materials, PCB boards, and composite materials.
2、 Main technical parameters:
1. Host power: 380V 1. 1KW
2. Vacuum pump power: 220V 180W
3. Diamond saw blade diameter: Φ 200mm
4. Grinding wheel diameter: 180mm
3. Fixture form: professional clamping of glass slide specifications, vacuum pump adsorption.
7. Can cut thin slices with a small thickness of 0. 5-0. 8mm
9. Can be dry cut or wet cut (dust collector is required for dry cutting).
10. Cooling method: Wet cut tap water cooling.
11. Noise<45dB
12. External dimensions: 650 × five hundred × 650mm
13. Weight: 80Kg
SCQM-3 cutting and grinding integrated machine (liquid nitrogen cooling, anti falling angle)
Used for cutting, grinding, and freezing loose rock sample end faces in the laboratory, as well as for cutting and grinding ordinary non loose rock sample end faces.
Main specifications:
Core cutting and grinding specifications: Ф twenty-five × 25-80mm Ф thirty-eight × 25-80mm
Diamond blade specifications: Ф two hundred × twenty × 1.2mm
Diamond grinding wheel specifications: Ф 200mm
Power: 150W
Blade speed: 2840r/min
Rock sample speed: 32r/min
Power supply: AC 220V
Technical features:
1. Rock sample rotary cutting and grinding
During cutting and grinding, the blade rotates the rock sample simultaneously to avoid the phenomenon of missing corners and falling edges during rock sample cutting.
2. 180 º flipping and turning fixture
Clamp the rock sample once, and after cutting one end, there is no need to remove the rock core and turn it around, and clamp it again. After flipping the fixture 180 º, the other end face can be cut and ground, ensuring that the two end faces are parallel.
3. The fixture is made of stainless steel to avoid rusting and inflexibility due to prolonged soaking, which may affect normal operation.
SCQ-1 rock slicer
1、 Product Description:
Technical Description: This product is used for cutting non-metallic materials such as ceramics, stones, crystals, glass, etc
2、 Technical parameters:
1. Host power: 2.2KW Y802-2
2. Diamond saw blade diameter: Φ 300mm
3. Vertical travel of work: 300mm
4. Cutting test piece: ≤ 100mm
5. Slicable thickness: 1mm
6. Horizontal travel of work: 100mm
7. Cutting line speed: 20-40m/s
8. Can be dry cut or wet cut (dust collector is required for dry cutting).
9. Wet cut tap water cooling.
10. Noise<45dB
11. External dimensions: 750 × six hundred and eighty × 900mm
12. Weight: 80Kg
SC-55 type free expansion meter
The rock free expansion tester is suitable for determining the swelling properties of rocks containing easily absorbent expansive minerals in the natural state, such as clay rocks. The test is the ratio of the radial and axial deformation of the specimen to the diameter and height of the specimen after immersion in water, respectively, expressed as a percentage.
Compliance with standard specifications:
SCL-1 Rock Collapse Resistance Tester
Product Description: This testing instrument is digital display, manually rotating the screw to apply pressure, suitable for expansion pressure tests under constant volume conditions in various rock expansion tests. It is equipped with testing devices such as permeable plates and micrometers.
Technical parameters:
1. Beam thickness: 50-60mm, ensuring the stability of the beam
2. Test force: can be selected between 40-100KN
3. Accuracy: better than level 1
4. Compressed space: 170mm
5. Column spacing: 165 mm
6. Fiberglass ring diameter: 141mm
7. Glass rigid ring height: 66mm
8. Metal ring diameter: 50mm
9. Metal ring height: 55mm
10. External dimensions of the host: 320mm × 320mm × 500mm
Technical advantages:
1. To reduce the gap between the upper connector, the displacement measurement plate is welded together with the upper ball socket to form a whole, reducing the gap.
2. The accuracy of the dial gauge is relatively high. To ensure the effectiveness of displacement, the dial gauge support is fixed at the swing column of the expansion pressure gauge through a nut to ensure stability. The support can automatically lift and rotate, ensuring that the water tank can be freely taken and placed, and the pressurization system can automatically lift and lower.
SCQP-2 series rock core splitting machine
The SCQP series core splitting machine is to put the shorter core under the knife edge, and then rotate the handle to fix the core, and rotate the large handwheel hard, and the core is longitudinally separated from it and slides along the plate to both sides of the splitting machine. This splitting machine cuts cores with a length of 120 mm and a core diameter of 80 mm, which is convenient and simple to operate, fast and efficient in cutting cores.
SCQP-1 Core Hydraulic Splitting Machine
The SCQP-1 core hydraulic splitting machine is used by laboratories and field sites to split the core into small pieces for easy mining sample preservation, slice identification or crushing testing.
Core double end face cutting and grinding integrated machine
This equipment is used for cutting and grinding the end face of rock samples in the laboratory, mainly suitable for the cutting of various rocks, concrete, crystals, ceramic ores and other non-metallic materials, and is an ideal precision cutting equipment for laboratories and production units.
SCQM100A Single Cutting and Grinding Integrated Machine
This machine is a dual-purpose machine designed and produced by our factory that integrates cutting and grinding together, with compact structure, beautiful appearance, easy operation, and greatly improving work efficiency. It is suitable for testing center laboratories of highways, railways, water conservancy, schools, construction projects and other departments. Tap water cooling.
SCQM150C Grinding Integrated Machine (Programmable)
This machine is the latest design and production of our factory set cutting, grinding in the integration of sample preparation equipment, designed for double knife cutting, double grinding wheel grinding, two saw blades, two grinding wheels are split shaft design, after adjusting the distance between the two cutting blades, press the start button, then the equipment enters the automatic workbench state. The machine is composed of workbench, grinding head, cutting, frequency conversion speed regulation system and touch screen, PLC control system, protection system, automatic lubrication system, tap water cooling system and other parts. It can clamp 4 pieces with a diameter of 100mm and 7 specimens with a diameter of 50mm at a time, which is fast and reliable, high efficiency, compact structure, stable and reliable, easy to operate, and greatly improves work efficiency. It is suitable for testing center laboratories of highways, railways, water conservancy, schools, construction projects and other departments. Tap water cooling.
SCQM150B Cutting and Grinding Integrated Machine (Programmable)
This machine is a new design and production of our factory, set cutting, grinding together cutting and grinding integrated sample preparation equipment, this machine uses PLC, LCD screen and frequency conversion governor to control the whole operation procedure, compact structure, beautiful appearance, easy operation, greatly improve work efficiency. It is suitable for testing center laboratories of highways, railways, water conservancy, schools, construction projects and other departments. Tap water cooling.
Previous page
1
2
…
8
Next page
Search
搜索
Taizhou Xianke Instrument Factory
Service Hotline:
Company Address:
Liangxu Sanlin Industrial Park, Jiangyan District, Taizhou City, Jiangsu Province
2022 Taizhou Xianke Instrument Factory 苏ICP备13056684号-1 www.300.cn
0523-88520868
messages 