The core sample automatic cutting and grinding integrated machine includes a cutting machine base plate and a cutting machine base plate clamp on the cutting machine base plate, characterized in that: the side of the cutting machine base plate is provided with an outwardly protruding cutting machine base plate connecting bar; the side of an additional base plate is provided with an outwardly protruding additional base plate connecting bar, and the additional base plate also has an additional base plate clamp; the additional base plate connecting bar is placed below the cutting machine base plate connecting bar, and after the fastening bolt passes through the through hole on the cutting machine base plate and the through hole on the additional base plate connecting bar, it is screwed with a fastening nut to fix the cutting machine base plate and the additional base plate together; the core sample is fixed on the cutting machine base plate and the additional base plate by the cutting machine base plate clamp and the additional base plate clamp. The core sample automatic cutting and grinding integrated machine does not break or strike during cutting, and the cut surface is smooth and flat.

What are the advantages of the core sample automatic cutting and grinding integrated machine? Let's take a look.

1. The core sample automatic cutting and grinding integrated machine adopts a water storage base and water pump circulation method, which is not restricted by water pipes, continuously circulates and reuses wastewater, and improves water resource utilization efficiency.

2. The movable part of the fixture seat ensures that the core sample can be cut at both ends without loosening, guaranteeing cutting accuracy.

3. The fixture base is equipped with multiple clamps, allowing for simultaneous cutting of multiple core samples, which is convenient, fast, and improves cutting speed.

4. The scale can accurately provide dimensional information, making observation simple and convenient, reducing the use of auxiliary tools, and making cutting dimensions more accurate.

What is the working principle of the core sample automatic cutting and grinding integrated machine? Let's take a look.

When cutting a core sample with a diameter of 7cm, the cutting length of the core sample should also be 7cm. First, observe the core sample, place the most suitable part of the core sample between the clamps, then rotate the adjusting screw to make the clamps tighten the core sample. Then, according to the scale, adjust the right side of the slider to the 1 cm mark to the left of the "O" mark, and then cut. Due to a one-centimeter clearance, the saw blade will not cut the slider. After cutting, move the slider to the right, sliding the right side to the 6 cm mark, and then cut again to complete. Since this side was 1 cm from the "O" mark before sliding and 6 cm from the "O" mark after moving, it moved a total of 7 cm. This means the core sample length is 7 cm after two cutting operations. The operation is simple, convenient, and fast, ensuring the dimensional accuracy of the core sample and laying a good foundation for subsequent experiments.

The core sample automatic cutting and grinding integrated machine uses a method of aligning both sides for cutting, which is basically consistent with the above cutting method. The difference is that after the slider moves, observe the left side of the slider. When the left side moves to the 1 cm mark to the right of the "O" mark, stop moving, and then cut. Both methods allow for the left and right sides to be interchanged; users can adjust according to their needs and habits, which will not cause cutting errors. The number of clamps is three, which allows for placing two core samples at a time, and cutting can also be completed in one go, saving energy.