Core sample automatic cutting and grinding integrated machine What should we pay attention to regarding startup detection and die-cutting blade maintenance? If you don't know about this, you can come and learn.

　　 Core sample automatic cutting and grinding integrated machine Before starting up, there are some necessary preparations to ensure the normal operation of the machine. Let's look at the startup detection of the automatic cutting and grinding integrated machine.

　　1. The control power supply, electrical system, and active control system of the automatic cutting and grinding integrated machine are ready.

　　2. Turn on the hydraulic pump and indicator light.

　　3. The electric drive is ready, everything is prepared, just waiting for the motor to drive the blade.

　　4. Confirm that the OK button on the control panel alerts on the computer. If the screen is still bright, you should restart immediately during operation.

　　5. Confirm that the fine-tuning system is ready.

　　6. Open the paper core chuck device.

　　7. Check if the necessary paper core sets have been produced.

　　8. Check the surface of the cleaning roller and clean the grooves of the bottom roller. Groove plugs can affect atmospheric exclusion and cause some issues. Before cleaning the grooves Core sample automatic cutting and grinding integrated machine set it to a quiet state.

　　9. Clean the area around the core sample automatic cutting and grinding integrated machine, clear redundant items, and refresh item placement.

　　The role of a good die-cutting blade should not be underestimated. It enables the automatic cutting and grinding integrated machine to operate at higher speeds, reduce the required die-cutting pressure, improve waste removal efficiency, reduce cutting fractures, and minimize die-cutting dust and thread phenomena. Therefore, we should learn how to properly use and maintain various die-cutting blades.

　　You should choose a cool and dry place to store die-cutting blades. To prevent blades from falling, a thin layer of oil can be brushed on and around the blades with a nylon brush. When storing, you should use Core sample automatic cutting and grinding integrated machine the box provided by the supplier, ensuring that the blade does not come into contact with any parts or items in the box. The entire die-cutting blade can be wrapped in foam plastic, and the support blocks in the box need to support the short shafts at both ends of the die-cutting blade, not on the blade itself.

　　When you need to pack and ship, you need to use sturdy boxes of appropriate size. Only one automatic cutting and grinding integrated machine should be placed in each box, and its surface should be covered with foam plastic. The short shafts at both ends of the core sample automatic cutting and grinding integrated machine should be fitted with perforated wooden blocks, which should be fixed inside the box to prevent the core sample automatic cutting and grinding integrated machine from shifting during transportation. The outside of the box needs to be tightly wrapped with packing tape, and the surface of the box needs to be marked with "Fragile" to attract attention.

　　We have many years of experience in the core sample automatic cutting and grinding integrated machine industry. If you want to learn more about this, please contact us. We can provide relevant introductions from different aspects.