Products
Categroies
SCQ-400E Pneumatic Cutting Machine
The SCQ-400E stone cutting machine is one of our factory's series of stone cutting machine products, which uses diamond disc blades to cut and sample various non-metallic solids. Especially suitable for cutting and sampling various types of rocks, ores, building concrete, and refractory bricks, it is an essential equipment for sample preparation in petroleum, geology, coal, metallurgy, construction, transportation, and scientific research departments of colleges and universities.
Main technical parameters:
1. Diamond cutter: 1A1RSS Ø 400 × thirty-two × one point two
2. Host power: Y112M-4 3KW
3. Cutting height of raw material: ¥ 100 mm
4. Fixture: Pneumatic clamping
5. Working mode: The blade can be automatically raised or manually raised with a button·
6. Cooling method: tap water cooling
7. Box size: length 680, width 700, height 1200mm
8. Weight: 250KG
Usage:
1. Connect the three-phase power supply to the air switch connector.
2. Press the start button and immediately press the stop button to rotate the diamond saw blade in the direction indicated by the arrow.
3. Connect the tap water cooling water pipe and ensure sufficient pressure.
4. Place the cylinder into the V-shaped groove on the workbench, turn on the solenoid valve switch, and press the pressure bar tightly against the specimen.
5. Press the foot switch with your foot to raise the blade and cut the specimen. After the specimen is cut, the blade can automatically turn back.
Notes:
1. The saw blade must rotate in the direction indicated by the arrow.
2. Sufficient pressure of cooling water is required.
3. The track must be washed clean with water every time it is cut.
SCQ-300C cutting machine
The SCQ-300C stone cutting machine is one of our factory's series of stone cutting machine products, which uses diamond disc blades to cut and sample various non-metallic solids. Especially suitable for cutting and sampling various types of rocks, ores, building concrete, and refractory bricks, it is an essential equipment for sample preparation in petroleum, geology, coal, metallurgy, construction, transportation, and scientific research departments of colleges and universities.
Main technical parameters:
1. Diamond cutter: 1A1RSS Ø 300 × twenty × one point two
2. Host power: Y112M-4 2.2KW
3. Cutting height of raw material: 100mm
4. Cooling method: tap water cooling
5. Box size: length 680, width 700, height 1200mm
5. Weight: 250KG
Usage:
1. Connect the three-phase power supply to the air switch connector.
2. Press the start button and immediately press the stop button to rotate the diamond saw blade in the direction indicated by the arrow.
3. Connect the tap water cooling water pipe and ensure sufficient pressure.
4. Grasp the specimen tightly on the workbench and lay it flat, push the workbench to bring the specimen close to the cutting blade, and then slowly cut into the specimen. The cutting speed is suitable for cutting depths of 40-60 millimeters per minute. When the test block is soft or thin, it can be cut faster, otherwise it is better to cut slowly.
Notes:
1. The saw blade must rotate in the direction indicated by the arrow.
2. Sufficient pressure of cooling water is required.
3. The saw blade should slowly approach the test block, otherwise sudden impact too quickly can cause the saw blade to lose teeth or deform.
4. The track must be washed clean with water every time it is cut.
SCQ-5 Automatic Core Cutting Machine
The SCQ-5 automatic core cutting machine is one of our main products, which uses diamond disc cutters to cut and sample non-metallic solids. For the cutting and sampling of various types of rocks, minerals, concrete, and refractory bricks, it is an essential equipment for sample preparation in departments such as petroleum, geology, coal, metallurgy, construction, schools, and transportation.
This machine has the advantages of beautiful appearance, compact structure, high degree of automation, full sealing, stainless steel casing, low noise, and convenient use.
Main technical indicators:
Work form: Single blade cutting of rock core
Main motor: Y100L-4 3KW
Cutting line speed: 33-45m/min
Longitudinal feed rate: work feed 6-60mm/min
Working motor: Y80L-4 0.55KW
Speed regulation: frequency converter
Speed range: 125-1250 rpm
Working hours: continuous
Environmental temperature: -5-40 ℃
SCQ-B-II Automatic Stone Cutting Machine (Blade Splitting Axis Design)
This machine adopts a new inverter motor to control the cutting system. It has the advantages of full sealing, low noise, automatic cutting and adjustable cutting speed, fast forward, automatic backward and so on. This machine can use high-quality stainless steel materials for the shell according to customer requirements, which is durable and beautiful. Using high-grade diamond blade, it can cut two parallel planes at the same time, and the distance between the two planes can be adjusted arbitrarily within the range of 150mm, and special specifications can be made according to requirements. It is suitable for cutting and preparing standard samples in geotechnical laboratories such as highways, railways, construction projects, water conservancy, and schools. This product strictly implements the industry standard of "Highway Engineering Rock Test Regulations" (JTG E41-2005).
SCQ-2A/3A型程控切石机
This machine is controlled by computer program, the data is accurately adjustable, and it is equipped with high-performance CNC and servo system to control the cutting. It has the advantages of full sealing, low noise, automatic cutting and adjustable cutting speed, fast forward, automatic backward and accurate cutting due to the high-precision walking system. The mode of this machine is frequency modulation. The advance speed can be adjusted with the core density during the work. The quality of rock core cutting is guaranteed. It effectively improves the service life of the diamond blade and the reliability of the whole machine. Simple operation, stable and reliable performance!
SCQ-B Automatic Stone Cutting Machine
SCQ-A (Automatic Variable Frequency)
SCQ-A (stainless steel version)
SCQ-2B/SCQ-3B stainless steel programmable type
SCQ-8 type
SCQ2A/SCQ3A Programmable Stone Cutting Machine
SCQ-300B type
SCO-5630 diamond wire cutting machine
This model is available with a slicing or slicing system
One-way circular wire walking structure
Diamond wire cutting control system
CQ-5A Programmable Automatic Core Cutting System
The SCQ-5A automatic core cutting machine is one of our main products, which uses diamond disc cutters to cut and sample non-metallic solids. For the cutting and sampling of various types of rocks, minerals, concrete, and refractory bricks, it is an essential equipment for sample preparation in departments such as petroleum, geology, coal, metallurgy, construction, schools, and transportation.
SCQ-A stainless steel cutting machine
Thismachineusingcomputerprogramcontrol,dataisaccurateandadjustable,equippedwithCNCandservosystemwithhighperformancetocontrolthecutting.Withfullysealed,lownoise,automaticcuttingandthecuttingspeedcanbea
SCQ-A (Stainless steel) Inverter cutting machine
Themachineadoptsanewinvertermotorcontrolcuttingsystem,featuredwithfullysealed,lownoise,automaticcuttingandadjustablecuttingspeed,movingforwardfast,automaticreturnandotheradvantages.Themachineismadeofh
Previous page
1
2
3
Next page
Search
搜索
Taizhou Xianke Instrument Factory
Service Hotline:
Company Address:
Liangxu Sanlin Industrial Park, Jiangyan District, Taizhou City, Jiangsu Province
2022 Taizhou Xianke Instrument Factory 苏ICP备13056684号-1 www.300.cn
0523-88520868
messages 